GC Epitex finishing and polishing strips - in different types

Interproximal surface preparation, finishing and polishing of composite, compomer and glass ionomer restorations.

• Extremely thin and flexible,
• Easy to apply, even at narrow contact points
• Resistant
• Abrasive particles are firmly embedded in the tape surface

Donation:
1 roll of 10 metres

FINISHING AND POLISHING BANDS
For use by qualified dental personnel in the specified area of application only.

AREA OF APPLICATION
Preparation, finishing and polishing of interproximal surfaces of composite, compomer and glass ionomer restorations.

1. Remove excess material with a suitable bur
. 2. Select the appropriate grit size.
3. Insert the tape between the interproximal contact points. Grasp both ends of the tape firmly and pull it back and forth.
4) Dispose of the used tape.

WARNING
(1) The edges of the EPITEX tapes are sharp. Wear protective gloves and goggles when using the tapes. Take care not to injure the patient's soft tissue
. (2) To avoid infection, the tapes are intended for single use only. Dispose of waste according to local regulations.
3) Always wear personal protective equipment such as gloves, mask and goggles.

PUBLIC TRANSPORTATION
Refill pack Available from all adhesive tapes and adhesive tapes 1 roll (10 m)

STORAGE
Store away from high temperatures and moisture to ensure optimum performance